Electrolux E9TB1-90BP, Manual

Page: 12 / 68

12 www.electrolux.com
CNT
CNS
KR
ID
TH
VN
EN
TROUBLESHOOTING
ITEM SYMPTOM CAUSE SOLUTION INDICATION
1
The blender
does not start
The ON/OFF button
was not pressed
Make sure the UI is in
ON_IDLE mode. If not,
press the On/off button to
turn the blender on
No LEDs indicators
are on
a. Jug is incorrectly
mounted or not locked
in place before starting
a program, pulse or
speed selection
b. Jug is incorrectly
mounted or not locked
in place after program
was paused.
Mount and lock the jug
correctly
a. Start chosen program/
speed again
by pressing the corre-
sponding button.
b. Press blinking button
to continue with paused
program
a. All LEDs (except
Wi-Fi) start pulsing for
3 seconds and then
goes to ON_IDLE
b. All LEDs (except
Wi-Fi) start pulsing for
3 seconds and then
goes back to the
PAUSED state.
a. Lid is not placed or
positioned correctly
on jug before starting
a program, pulse or
speed selection
b. Lid is not placed or
positioned correctly on
jug after program was
paused.
Place or move lid to the
correct position
a. Start chosen program/
speed again
by pressing the corre-
sponding icon.
b. Press blinking button
to continue with paused
program
The motor has over-
heated
Turn off the blender,
unplug the machine, wait
for 10 mins for the motor to
cool down before turning
on blender again
The appliance turns
off and no LEDs
indicators are on
The plug is not prop-
erly connected to the
power outlet or there
is no power from the
power outlet
Check the connection of
the plug to the power out-
let or try another outlet
No LEDs indicators
are on
Power outage
Wait until power outage is
over to use product No LEDs indicators
are on
In the APP_Mode, the
blender cannot be
started
The blender is disconnect-
ed from the network. Make
sure the wireless network is
working with Blender
APP cannot detect
appliance
Functional failure
Please contact local
service support for further
assistance
Appliance cannot
function after trouble-
shooting measures
are taken.