The oven light illuminates the main oven when
the Selector is turned to .
The top oven light illuminates when the oven
temperature control is turned.
REPLACING AN OVEN LIGHT
BULB
The type of bulb required is a 300°C, 25 watt
small Edison Screw.
1. Make sure the appliance is cool before you
replace a bulb.
2. Open the oven door and remove the shelves
wirework runners and side panels.
Instructions on how to remove the wirework
runners are given on page 47.
3. Pull the glass bulb cover towards you and
then pull it off. If necessary use a screwdriver
to carefully lever off the cover, taking care not
to damage the oven cavity.
4. Unscrew the bulb by turning it to the left.
5. Fit a new bulb and then replace the glass
bulb cover.
6. Refit the wirework runners, side panels and
replace the oven shelves.
7. Restore the appliance to the electricity supply
and reset the time of day.
THE OVEN LIGHTS
Isolate the appliance from the
electricity supply before replacing
the bulb.
48