![Electrolux CEI30EF5GB Service Manual Download Page 5](http://html.mh-extra.com/html/electrolux/cei30ef5gb/cei30ef5gb_service-manual_98108005.webp)
Page 5
SURFACE TEMPERATURE LIMITS
1. Product must be undamaged, correctly assembled and have the cor-
rect oven temperature.
2. All skin temperatures are based on a room temperature of 77° F (25° C)
and an oven set temperature as specified below:
For ELECTRIC ranges built prior to 08/26/2003 - 400° F
For ELECTRIC ranges built after 08/26/2003 - 475° F
For GAS ranges built prior to 01/01/2004 - 400° F
For GAS ranges built after 01/01/2004 - 475° F
3. Oven must be cycling at designated test temperature for one hour
before test is conducted.
4. Pyrometers, (temperature testers), must be of high quality and properly
adjusted.
5. An increase or decrease of 1° F in the room ambient temperature, will
allow a 1° F increase or decrease in the maximum allowable surface
temperature of the range.
All gas and electric ranges must comply with U.L and A.N.S.I. surface temperature limits outlined in the following chart.
Note that the testing temperature is different for electric ranges produced
after
08/26/2003.
MATERIAL TyPE / FINISH
PAINTED
PORCELAIN
GLASS
PLASTIC
†
METAL
LOCATION
Side Panel
152° F
160° F
—
—
—
Oven Door
152° F
160° F
172° F
182° F
—
Warmer Drawer
Front Panel
152° F
160° F
—
—
—
Knobs & Handles
—
—
—
*167° F
**182° F
131° F
**152° F
Skirt
—
—
—
*182° F
*152° F
Cooktop
Lower Console
Oven Vent Area
NO TEMPERATURE LIMITS APPLy TO THIS AREA
†
Includes plastic with metal plating not more than 0.005” thick and metal with a plastic covering not
less than 0.005” thick.
* Self-Clean Gas Range at Clean Temperature
** Self-Clean Electric Range at Clean Temperature
The chart seen here can be used to test the resistance of
the oven temperature sensor probe. For accuracy in testing
use a high quality thermometer or temperature meter to
determine actual oven temperature before reading the
resistance of the probe.
RTD Temperature / Resistance Chart
Maximum Allowable Surface Temperatures
Electric Range Component Resistance Chart
RANGE TECHNICAL DATA
RANGE TECHNICAL DATA
RTD SCALE
Temperature (°F)
Resistance (ohms)
32 ± 1.9
1000 ± 4.0
75 ± 2.5
1091 ± 5.3
250 ± 4.4
1453 ± 8.9
350 ± 5.4
1654 ± 10.8
450 ± 6.9
1852 ± 13.5
550 ± 8.2
2047 ± 15.8
650 ± 9.6
2237 ± 18.5
900 ± 13.6
2697 ± 24.4
Probe circuit to case ground
Open circuit / Infinite Resistance
NOTE: RESISTANCE MEASUREMENTS ARE APPROxIMATE. VARIATIONS DUE TO TEMPERATURE CHANGES
AND OTHER FACTORS ARE NORMAL.
COMPONENT
VOLTAGE
RATING
WATTAGE
APPROxIMATE
ReSiSTAnCe Ω (ohMS)
BAKE ELEMENT
208 / 242
3000
16 Ω
BROIL ELEMENT
208 / 242
4000
14 Ω
WARMER DRAWER ELEMENT
108 / 132
700
20.5 Ω
WARMER DRAWER ELEMENT
108 / 132
450
32 Ω
MINI OVEN ELEMENT
108 / 132
1000
14 Ω
CONVECTION ELEMENT
108 / 132
350
40 Ω
CONVECTION ELEMENT
108 / 132
200
72 Ω
CONVECTION FAN MOTOR
WINDINGS
108 / 132
35 Ω
LOCK MOTOR WINDINGS
108 / 132
2000 Ω
OVEN TEMPERATURE SENSOR
PROBE (AT ROOM TEMPERATURE)
-
1100 Ω *
*(
refer
to
rtd
chart
)
Summary of Contents for CEI30EF5GB
