30
FRY TOP 700/900 EL/GAS
2.3.2.2 BURNER
The primary air
(aerator) is correctly adjusted when the flame does not float with the burner cold and there is
no flareback with the burner hot.
1. Undo screw “
A
“;
2. Position aerator “
E
“at distance “
H
“Refer to indicated distance at §
3. Retighten screw “
A
“ to fix in place
Replacing the main burner nozzle.
1. Loosen nut “
A
“;
2. Unscrew nozzle “
C
“; for a more comfortable operation loosen the aerator “E“ in such way you will have more
space to operate.
3. Replace nozzle “
C
“ with one suitable for the type of gas according to that given in table (Refer to §
), the nozzle diameter is given in hundredths of mm and engraved onto the nozzle body.
4. Ins
ert nozzle “
C
“ into its housing and tighten it.
5. Adjust the
aerator “
E
“at distance “
H
“ and fix it in place with the adjustment screw “
A
”.
2.3.2.3 PILOT
1. Undo screw coupling “H“;
2. Replace nozzle “G“ with one suitable for the type of gas. Refer to §
; The identification number
is engraved on nozzle body.
3. Retighten screw coupling “H“.
700 BURNER
900 BURNER
Summary of Contents for A7FTEDCSI0
