Electro-Voice Telex RE-1, Operating Instructions Manual

Page: 21 / 37

Copy Group
Selecting the Copy Group will copy the currently se lected
group to the first un used User Group.
Press [SET] to accept the group and place the unit into the
Frequency Edit Screen (User De fined groups only) for ed iting.
Press [UP/DOWN} to select a different user group.
Press [MENU] to re turn radio to its pre vious state.
Screen Timer
Selecting the Screen Timer allows enabling/disabling of
screen timer. With timer en abled the screen will re turn to Op -
erating screen if no key is pressed within five minutes.
NOTE:
Timer is not active in the sound check screen.
Press [UP/DOWN] to turn timer ON/OFF.
Press [SET] to setting.
Press [MENU] to re turn radio to its pre vious state.
Clear Group
Clear Group will delete all channels within the selected group.
Press [SET] to clear the group, and place the unit in the
Group/Channel edit screen with Group=1, Channel=1. Group
will be flashing to enable the se lection of a new group.
Press [MENU] to re turn radio to the op erating screen.
Lock out
Press and hold [UP] + [DOWN] for 3 seconds. The unit will
not allow editing of any of the user variables: Group, Chan nel,
Frequencies, Squelch, Name, and ClearScan
TM .
Mas ter Re set
Press and hold [Menu + Set + Up + Down] to place the unit
into its factory con figuration: Group 1, channel 1, user groups
cleared, default squelch set ting.
Transmitter On/Off Lock Out
There are two On/Off lock out modes available, One Time and
Everytime.
One Time: Cycling the power switch 3 times in un der 3 sec-
onds and On-Loc will be displayed for a second and then re -
turn to nor
mal op eration. The power switch alone will no
longer turn the unit off. To turn the unit off, put the power
switch in the off po sition (On-Loc will be displayed) open the
battery door and press [Menu], [Set], [Up] or [Down] and the
unit will power down. The next time the unit is pow ered on
the power switch will operate normally.
Everytime Use: With the unit on and op erating in the normal
mode, press and hold [Set] and press [Up]. On-Loc will be
displayed and the power switch alone will no lon ger turn the
unit off. To turn the unit off, put the power switch in the off
position (On-Loc will be displayed) open the battery door and
press [Menu], [Set], [Up] or [Down] and the unit will power
down. The next time the unit is pow ered on the On-Loc func -
tion will still be on. To en able the power switch, press and
hold [Set] and press [Down] (On-Off will be displayed).
4-7
t o Gr o u p 1 4 u
Ch 0 1 MH z 7 2 3 . 4 0 0
Co p y Gr o u p 1 2 u
Fig ure 18
Copy Group
S c r e e n T i me r ON
Fig ure 19
Screen Timer
Cl e a r U s e r Gr o u p ?
1 2 u
Fig ure 20
Clear Group