ELECTRO FREEZE Model CS5
10
184627
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
7.2 Disassembly Instructions
It is important that the freezer be
disassembled, washed, lubricated and
sanitized before operation.
NOTE: If there is product in the
freezer, refer to Section 10, Closing
Procedures, 10.1 Draining Product.
CAUTION
To avoid electrical shock or
contact with moving parts, make
sure all switches are in the “OFF”
position and that the main power
supply is disconnected.
1. Remove plunger rod (4, figure 7-
2) by lifting it up and pulling the bottom
out and down. Remove the hand knobs
(8) and pull the dispensing head (1)
straight out.
2. Remove the handle pin (7),
plunger (5) and nozzle (9) from head (1).
3. Remove the beater shaft (1,
figure 7-3) from the cylinder. Then
remove breaker bar (2), beater bushing
(4) and shaft seal (3) from the beater
shaft.
4. Remove hopper cover. Remove
drip tray and drip tray insert.
5. Remove the mix feed tube (figure
7-4) and mix float from the hopper.
CAUTION
To prevent bacteria growth,
remove all O-rings when
cleaning. Failure to do so
could create a health
hazard.
6. Remove O-rings (2) from mix
feed tube (1).
7. Remove regulator (3) from mix
feed tube. Remove O-ring (4) from
regulator.
8. Remove O-ring (2, figure 7-2)
from head (1). Remove O-rings (3) from
plunger (5). Remove the seals from the
washer on the shaft seal assembly (3,
figure 7-3). Disassemble the shaft seal
assembly (figure 7-5).
Figure 7-2
Figure 7-3
Figure 7-5
Figure 7-4
Summary of Contents for cs5
Page 47: ...184627 01 9 ...