123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
ELECTRO FREEZE Cocktail/Slush Freezer Model 812
28
184946
12 Troubleshooting Tables
PROBLEM
PROBABLE CAUSE
REMEDY
1.
Low line voltage.
1.
Check for other equipment on the same
circuit. Call power company or your
Electro Freeze Distributor.
2.
Improperly wired.
2.
Contact your Electro Freeze Distributor
for service
3.
Current relay defective.
3.
Contact your Electro Freeze Distributor
for service
4.
Start capacitor weak.
4.
Contact your Electro Freeze Distributor
for service
Compressor
starts, but
remains in
start windings.
(single phase
only)
5.
High discharge pressure.
5.
Check air condenser. If it needs to be
cleaned contact your Electro Freeze
Distributor.
1.
Product put in hopper was not precooled. 1. Precool product – DO NOT FREEZE.
Product
temperature in
hopper rises
above 45°F.
2.
Component out of adjustment or
component failure
2. Contact your Electro Freeze Distributor
for service.
Product in
hopper freezes.
1.
Component out of adjustment or
component failure.
1. Contact your Electro Freeze Distributor
for service
1.
Dirty or blocked condenser, restricted air
flow and/or high room temperature.
1. Remove obstruction and/or lower room
temperature. Have condenser cleaned
by your Electro Freeze Distributor.
2.
Dispensing too much product too fast.
2. Check freezer capacity rating.
3.
Product too warm going into freezer.
3. Precool product – DO NOT FREEZE.
Poor or slow
product
recovery.
4.
Component failure.
4. Contact your Electro Freeze Distributor
for service