ELECTRO FREEZE Cocktail/Slush Freezer Model 812
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
184946
3
1. Where codes permit, we recom-
mend that the freezer be installed on
casters and have flexible water and
electrical connections for easier service
and cleaning.
2.
Air and water cooled
models
require a 6-inch (15.2 cm) clearance on
all louvered panels for adequate ventila-
tion.
CAUTION
All materials and connections
must conform to local
requirements and be in
compliance with the National
Electrical Code (NEC).
3.
Water cooled
models require a
3/8-inch MPT water inlet and water
waste connection. The connections are
found on the bottom to access remove
lower front panel. They are tagged
“Water Inlet” and “Water Waste.” A
manual shut-off valve should be in-
stalled in the water inlet line at the time
of installation.
4. Place the freezer in its final
location and adjust the legs or casters
so that it is level side-to-side and the
front is approximately 1/4-inch lower
than the rear to allow proper drainage
of the freezing cylinder.
2.3 Electrical Requirements
2.2 Installation
CAUTION
To prevent accidental
electrical shock, a positive
earth ground is required.
1. Always verify electrical specifica-
tions on the data plate (see figure 3-1) of
each individual freezer. Data plate specifi-
cations will always supersede the infor-
mation in this manual.
2. Supply voltage must be within ±
10% of voltage indicated on the name-
plate. Also, on three-phase systems,
voltage between phases must be bal-
anced within 2%. (More than a 6 volt
difference between any two voltage
measurements at 208-230 volts indicates
a possible imbalance.) Request your
local power company to correct any
voltage problem.
3. An easily accessible main power
disconnect must be provided for all poles
of the fixed wiring to the freezer.
