ELECTRO FREEZE Cocktail/Slush Freezer Model 812
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
184946
23
11 Routine Maintenance
(continued)
Accessory - Lighted Sign
Changing Light Bulb
1. Remove screws holding top cover
of light assembly.
2. Slide out decal and plastic lens to
expose light.
3. Rotate light bulb horizontally to
remove from sockets.
4. Replace with identical light of same
rating and reassemble top cover.
CAUTION
To avoid electrical shock or
contact with moving parts,
make sure all switches are
in the “OFF” position and
that the main power supply
is disconnected.
Monthly
6. Look inside the freezing
cylinder toward the rear. The drive
shaft coupling should
NOT
be
turning. Turn the switch off and
disconnect the main power supply.
7. If the drive shaft coupling
is turning, or you are unable to
determine whether or not the shaft
is turning, turn the switch to the
“OFF” position, disconnect the
main power supply and contact
your Electro Freeze Distributor for
service.
DO NOT
place the freezer
in service until the problem has
been fixed.
B. Water Condenser.
Check the outlet water
temperature of water-cooled
condensers at the floor drain.
Water temperatures should be
about 95°F with a 70°F water inlet
temperature.
A. Test Head Switch.
The head switch feature is
designed to prevent the beater
shaft from being accidentally
activated. It is essential that the
proper operation of this switch be
verified on a routine basis. Use the
following instructions to test for
proper operation:
1. Be sure all switches are in
the “OFF” position.
2. Disconnect the main power
supply.
3. Remove the dispense
head and beater shaft assembly.
4. Connect the main power
supply.
5. Turn the selector switch to
the “CLEAN” position.
CAUTION
Moving parts. DO NOT place
hands in the freezing
cylinder. Severe personal
injury could result.
