ELECTRO FREEZE 812, Operator'S Manual

Page: 26 / 77

ELECTRO FREEZE Cocktail/Slush Freezer Model 812
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
123456789012345
16
184946
7 Assembly
(continued)
7. Insert assembled beater into
cylinder by placing rear blade on bottom
of cylinder and depressing front blade
and spring. This will center the beater
shaft and allow alignment with drive
shaft. Rotate beater assembly while
pushing, until shank has fully engaged
the drive shaft.
8. Slide beater toward you about ½-
inch. (This is necessary to align and
install door properly.)
9. Assemble piston assembly (figure
7-4, items 10, 11, 12, 13) by installing the
first rod o-ring (12) in groove farthest from
the threads on piston rod (13) and lubri-
cate. Then slide piston (10) over o-ring,
large diameter end first. Now install the
second (holding) rod o-ring (12) on rod
(13) in groove closest to the threads and
lightly lubricate. Install and lubricate piston
o-ring (11).
10. Insert spring (9) into back side of
door piston body.
11. Insert the piston assembly,
threaded end first, through the center of
the spring in piston body until the piston is
flush with the back of the door (1).
12. Thread nut (5) on piston rod until
it is off threaded portion, then screw the
ball knob (6) down finger tight.
13. Install and lubricate the outlet
valve o-ring (8) then insert outlet valve (7)
into piston body.
14. Install and lubricate the two air
bleed plug o-rings (3) then insert plug (4)
into the door (1).
15. Install door gasket (14) into the
groove on back of door (1). Lightly
lubricate.
16. Install dispensing door (1) on
freezer by sliding door over threaded
studs and aligning square end of breaker
bar with square in dispensing door. Slide
door into cylinder and install hand knobs,
being careful to tighten simultaneously
and finger tight only.
NOTE: If the door (1) does not slide
easily into place, recheck engagement
of beater with the drive shaft.
Important:
DO NOT use excessive force when
tightening the hand knobs. Excessive
force will damage the door (1). Tighten
finger-tight only.
Figure 7-4
O-RING (ROD)
PISTON VALVE
ROD-PISTON
O-RING-OUTLET
OUTLET-VALVE
GASKET
(DOOR/HEAD)
O-RING (PISTON)
SPRING-PULL VALVE
DOOR (HEAD)
KNOB-BALL
NUT-PISTON ROD
PLUG-ASSY.
AIR BLEED
O-RING (PLUG)
KNOB-HAND