Electro-Automatik PSI 9000 Series, Manual, Page: 34 / 64

34
© 2006, Elektro-Automatik GmbH & Co. KG
Irrtümer und Änderungen vorbehalten
EN
© 2006, Elektro-Automatik GmbH & Co. KG
Index
Page
1. Introduction 36
2. Technical specifications 36
2.1 Control panel 36
2.2 Model specific data 37
3. Device description 38
3.1 Front view 38
3.2 Rear view 38
3.3 Control panel (Human-Machine-Interface HMI) 39
3.4 Used symbols 40
3.5 Short overview about the display elements 40
3.6 Scope of delivery 40
4. General information 41
4.1 Prologue / Warning 41
4.2 Mains connection / Grounding 41
4.3 Cooling 41
4.4 Transportation / Front handles 41
4.5 Disassembly 41
4.6 Temperature depending shutdown 41
4.7 Case variant 41
5. Installation 41
5.1 Visual check 41
5.2 Mains connection 41
5.3 DC output on the rear 41
5.4 DC output on the front / fuse 41
5.5 Remote sense feature 41
5.6 Interface card slots 42
6. Handling explained in detail 42
6.1 Switching the unit on 42
6.2 Switching the power output on 42
6.3 Adjusting the set values 42
6.4 Switching the key panel 43
6.5 Locking the key panel 43
6.6 Changing the location mode 43
6.7 Switching to the function manager 43
6.8 Activating the menu 43
6.9 Parameter pages 44
6.10 Alarms, warnings and signals 44
6.11 Acknowledging alarms and warnings 45
6.12 The function manager 45
6.12.1 Configuring the function 46
6.12.2 The function layout 46
6.12.3 Defining sequence points 46
6.12.4 Sequence related parameters 47
6.12.5 Defining the sequence points 47
6.12.6 Display during the function run 47
6.12.7 Controlling the function manager 47
7. Device configuration 49
Part 1: The menu Profile 49
7.1 Defining operation parameters 50
7.2 Presetting sets of set values 50
7.3 Adjustment limits 51
7.4 Configuring the control panel 51
7.5 Configuring the graphic display 52
7.6 Supervision 52