43
© 2006, Elektro-Automatik GmbH & Co. KG
EN
6.4 Switching the key panel
The key
PAGE
is used to switch to another key
panel. The new key assignments of the other key panel allow
the user to lock the key panel, switch to the function manager
or set the location mode.
6.5 Locking the key panel
The key „Lock key panel“ locks all keys, except
itself, and the rotary knobs. The unit is now locked from
manual acess, so that no set value can be changed or no
menu is accessible. The locking mode can be set up in the
menu. The key panel can be either completely inactive or it
can exclude the
OFF
key (the unit is then locked but can be
switched off and on by the
OFF
key). See also „Enable key
panel lock“ in section „7.4 Configuring the control panel“.
After the key panel was locked it changes to this
icon. The key can be used to unlock the key panel again, if
this key is pressed directly after it in 2s.
6.6 Changing the location mode
The unit can be set up to a location mode which doesn’t
allows it to be remotely controlled or switched over to remote
control by an interface card.
EXT
With the key
EXT
the user enables the remote
control of the unit via an digital or analogue interface card
and disables the
local
mode.
With this key the user sets the unit into strict local
mode, so that it is only controllable locally (
local
), means
by hand.
6.7 Switching to the function manager
SEQ
The
SEQ
key switches the display over to the
function manager mode.
Switching over to the function manager is only possible while
the unit is in standby (output = off). The current set values of
voltage and current are set to 0V and 0A. For details about
the function manager see section „6.12 The function mana-
ger“.
6.8 Activating the menu
M
The main menu is acessed with the
MENU
key
and the display changes to the main menu level. A text menu
like this appears:
Profile
Setting up and selecting user profiles
Function
Setting up a function sequence
Communication
Configure the interface cards
Options
Default setup, unlock features,
Lock device configuration
Info
Short overview about the settings
About
…
Manufacturer, Service, SW version etc.
ESC
A menu page is left to the next higher level by
pressing the
ESC
key.
The
SELECT
keys are used to select
another menu entry.
The
RETURN
key then enters the menu entry into
the next sublevel by pressing it. The lowest menu level always
shows up as a parameter page. See next topic for details.
ESC-TASTE
Rücksprung auf
übergeordnete Seite
ESCAPE key
return to previous page
ESC
Auswahl-Tasten
nächster Menüpunkt
auswählen
Select key
choose next menu point
ENTER-Taste
untergeordnete
Seite öffnen
ENTER key
change to
subpage
Profile
Function
Communication
Options
Info
About . . .
(
(
(
Using the power supply