Electrify America innogy eBox professional, Installation Instructions Manual

Page: 14 / 28

Mounting the Dock on a wall
After choosing a suitable site and making all of the
preparations, you can now mount the Dock.
14
01
The Dock packaging contains a
drilling template that simplifies the
mounting work. Use this if necessary.
Use the template and a level to
mark the three holes on the wall, or
drill directly through the positioned
template.
For full accessibility to the charger,
the upper hole should be 3'-9" (1.15 m)
above the floor.
Standard height:
5' (1.5 m)
For full accessibility
of charging only:
3'-9" (1.15 m)
DOCK INSTALLATION INSTRUCTIONS
Information on mounting
The Dock is secured through three screw holes to the
wall. To start, place the rear side of the Dock on a flat
surface, and remove the contact guard. The contact
guard is clipped without screws to the Dock. It is replaced
after the connection to the main power supply.
Use a screwdriver to remove the contact guard. To do
this, insert the screwdriver into the slots on the side of
the contact guard and carefully lift it.
WARNING
The Dock must be mounted on a flat
surface so that the Dock does not deform.