Electra Monoblock 7, Service Manual

Page: 180 / 187

English 21
OPERATING PROCEDURE
Plug the unit into a power supply, and the power supply indicator (C2) lights up. This indicates
that the unit is ready for operation.
TURNING ON THE AIR CONDITIONER
Turn the selector switch knob (A) from OFF to any desired position.
FAN OPERATION (VENTILATING)
Turn the selector switch knob (A) to (A2)
High fan (A2)
COOLING OPERATION
Turn the selector switch knob (A) to one of the following positions:
High Cooling (A3)
Low Cooling (A4)
When the cooling mode is activated, indicator (C1) will light up. It is recommended to use the
High-cooling mode (A3) when a fast drop in temperature is required, while the Low cooling mode
(A4) should be used for normal, quiet operation to maintain the selected temperature.
SELECTING THE TEMPERATURE
The desired temperature is selected by turning the temperature control knob (B).
If the temperature is lower than desired, turn knob (B) counterclockwise to a new position.
If the temperature is higher than desired, turn knob (B) clockwise to a new position.
TURNING OFF THE AIR CONDITIONER
Turn the selector switch (A) to OFF position (A1). The operation indicator (C2) will remain ON.
WARNING:
Wait 5 minutes before restarting the cooling modes, or before changing the temperature setting.