Electra Monoblock 7, Service Manual

Page: 172 / 187

English 13
Figure 14. Remote control application
THE WIRELESS REMOTE CONTROL BRINGS ALL FUNCTIONS TO YOUR FINGERTIPS.
USE OF WIRELESS REMOTE CONTROL
PRIOR TO OPERATION
Prior to operating your air conditioner, make sure that:
The unit is properly connected to the power
supply.
The red tab protecting the remote control battery
has been removed.
For clock settings, see page 18.
REMOTE CONTROL BATTERY CHANGE
Remove the batteries from the remote control unit,
as shown on figure 14. Use two 1.5 volt, size AAA
batteries.
For reserving the environment, please return used
batteries for recycling process.
Use the remote control compartment when the unit is
not in use. The remote control can be flipped in or out
of its compartment. (See figure 14).
REMOTE CONTROL COMPARTMENT
PROTECTING THE ELECTRONIC SYSTEM
Indoor unit and the remote control must be at least
one meter away from any TV, radio or any other
electronic home appliance.
Protect the unit and the remote control from direct
sunrays or lighting.
Aim the remote control towards the air conditioner's infrared signal receiver when it is operating.
The remote control signal can be received at a distance of up to 8m.
Be sure that there are no obstructions between the remote control and the signal receiver.
Do not drop or throw the remote control unit.
Do not place the remote control unit in a location exposed to direct sunlight, or next to a heating unit, or any
other heat source.
Do not expose the air conditioner signal receiver to strong light, such as a fluorescent lamp or sunlight.