Electra Monoblock 7, Service Manual

Page: 178 / 187

TIMER OPERATING MODES
English 19
I. TIMER ON
This mode enables you to set a time for starting its operation. Press the TIMER button (8) until the ON sign
blinks. Starting time can be adjusted using the up and down buttons (9) and (10), respectively. Press SET button
(13) to activate the timer.
Example: Operation is restored at 10:30
II. TIMER OFF
This mode enables you to set the time at which timer stops its operation. Press the timer button (8) twice and the
OFF sign will blink. Time can be adjusted using the up and down buttons (9) and (10), respectively. Press SET
button (13) to activate the timer.
Example: Operation stops at 18:00
III. TIMER ON AND OFF
This mode enables you to set the start and stop time of operation. Press the TIMER button (8) until the ON sign
blinks; by pressing again the OFF sign will blink. Time can be adjusted by using the up and down buttons (9)
and (10), respectively. Press SET button (13) to activate the timer.
Example: Operation is restored at 10:30 and stops at 18:00.
IV. CLEAR
Use this mode to cancel timer operation. Press CLEAR button (14) and timer operation will terminate, and the
LCD display will be cleared for each timer mode. When the CLEAR button is pressed, the timer indicator (A) will
turn OFF.
NOTE: If the timer button (8) is selected and neither TIME ADJUST, SET, or CLEAR buttons are pressed within
15 seconds, the timer operation will be cancelled and the last set-up will be displayed.