Electra Monoblock 7, Service Manual

Page: 176 / 187

7
2
3
4 5
2
3
5 4
3
English 17
AUTOMATIC VERTICAL AIR SWING
Press button (7) to activate the auto air swing.
Press the button again to deactivate this function.
HEATING OPERATION *
Select the HEATING mode by pressing MODE button
(2). Switch to the desired Fan Speed or to AUTO FAN
by pressing the Fan button (3). Select suitable
temperature setting. (see figure 7 for unit installation)
HEATING OPERATION WITH AUTO FAN MODE *
This operation starts with the highest air flow in order
to quickly raise the room temperature. It will then
automatically switch to the lower air flow to quietly
maintain the selected temperature.
SELECTING THE TEMPERATURE
Press temperature button (4) or (5) to change the
temperature setting on the LCD operation display (11).
The temperature setting is shown in centigrade
degree. A higher number indicates a higher room
temperature; a lower number indicates a lower room
temperature.
DRY OPERATION
Select the DRY mode by pressing MODE button (2).
Select the suitable temperature setting. While in DRY
mode, the air conditioner will operate at low fan speed,
regardless of the fan setting on the LCD operation
display. The fan might stop operating from time to time
to prevent over-cooling.