Electra CON 12, Service Manual, Page: 131 / 137

1
AUT
O
ON
OFF
MODE
+
-
TIM
E
R
SET
CL
EA
R
I N S T A L L A T I O N I N S T R U C T I O N S
FOR SPLIT WALL MOUNTED AIR CONDITIONER
ACCESSORIES SUPPLIED WITH
THE AIR CONDITIONER
Shape Name Qty Used for
Mounting Plate
Wall mounting
of the indoor
unit
Remote control
with batteries Operation of
Unit
Screws
washers dowels
Wall mounting
of indoor unit
Outdoor unit
drain connector Outdoor unit water
drain
Mounting pads
Cable ties
Cable terminals
Twin wire cable
(for heat pump
units)
Operation and
installation
instructions
Air purifying filter
(optional)
Padding of outdoor
unit bottom support
Securing wires in the
indoor and outdoor
unit
Securing of grounding
wire on the indoor and
outdoor unit
Transmitting signals
Users and installers
reference
cleaning the air
2
Fig 1 Fig 2
1
2
LOCATION OF INDOOR AND
OUTDOOR UNITS
Select the location considering the following:
INDOOR UNIT
OUTDOOR UNIT
1. Choose a location which will provide good air circulation.
ensure that no objects or furnishings prevent air circulation.
2. Do not install the unit near a heat source or where it will be
exposed to direct sunlight.
3. The location must allow convenient electrical draingage and
tubing connections.
4. Installation site should provide an easy passage to outdoors.
5. The unit must be mounted on a strong wall that will
withstand the generated vibrations.
6. Install the mounting plate as shown.
1. The location must allow easy servicing and provide good air
circulation.
2. The unit may be suspended from a wall by a bracket
(Optional) or located in a free standing position on the floor
(preferably slightly elevated).
3. If the unit is suspended, ensure that the bracket is firmly
connected and the wall is strong enough to withstand
vibrations.
4. Unit location should not disturb neighbors with noise or
exhaust air stream.
5. Place the mounting pads under the unit legs.
6. Install the outdoor unit as shown. Refer to the technical and
service manual for allowed distances.
7. When the unit is installed on a wall, install the drain
connector hose and drain plug as shown.
Fig.1
1.Botom of outdoor unit
2.Drain connector Fig.2
Drain installation
Example