background image

The menu in English

The menu in English

!

To access the menu, press the 

menu upp 

or 

menu down 

button

The display now shows ENTER PIN. Use the 

menu buttons

 upp/down

 to go trough the menues. 

1. 

INSTALL 

Registering and de-registering sensors, remote controls and thermostats.

2. 

SET CLOCK 

Setting the clock se page 8

3.

 PHONE NUMBERS

 Setting the phone numbers se page 8

Sub menu:

PHONE 1
PHONE 2
PHONE 3
PHONE 4
PHONE 5
PHONE 6

4.

MESSAGE:

 Recording and checking your own spoken message se page 8

Sub menu:

RECORD

  Record your own spoken message.

REPLAY 

Listen to your own spoken message.

5.

 NEW PIN

 Change your PIN code (se page 12).

6. 

MEMORY CLEAR

 Clear all sensors, remote controlls, thermostats, timers or settings (se page 5-7).

Sub-menu:

CLEAR ALL SENSORS  

Remove a registered sensor.

CLEAR ALL REMOTES

  Remove a registered remote control.

CLEAR ALL TIMERS  

Remove all timer settings at once.

CLEAR ALL THERMOSTATS Remove all thermostat settings at once.
CLEAR LOG Remove the Event Log.
MASTER RESET Clear the memory.

7. 

OPTIONS

Sub menu:

CHIME - CHIME ON/CHIME OFF  

When the chime function is activated, the display will show a sound 

symbol.(se page13).

SIREN - 

SIREN ON / SIREN OFF Switch off siren for silent alarm ( page 13).

HOUSE CODE: Change the House Code for Home Automation functions  (page 15).
UNIT CODE: Change the Unit Code for Home Automation functions (page13).
ANSWER TYPE: Answer ON/OFF/VOICE MAIL(page 15)
SENSOR MODE:

 

Use sensors as emergency sensor

SENSOR 27-32: 

NO+ON/OFF Used for settings zones 27 to 32 to send Home Automation ON or OFF            

commands on House Code +1 and Unit Code 7-12, in respond alarm trigger from respective zones 27-32
    (E.g.zone 27 is related to UC 7,29 to 9 etc). 

 

COMFORT: To set COMFORT ,ECONOMY and FROST level temperatures.
LANGUAGE:

 English/Francais/Deutsch/Nederlands/Italiano/Espanol/Portugese/Svenska/Romana/Turke

8. 

DELAYS

Sub menu:

ENTRY DELAY 

The time you get to switch off the system after entering your house (page 12).

EXIT DELAY before the system will be armed on whenyou leave your house (page 12).
DIAL DELAY before the system calls out in case of an alarm (page 12).
ANSWERS DELAY before the system picks up the phone when dialling in (page 12).

9. 

SET TIMER

NEW TIMER Setting a new  timer or thermostat setback (page 11).

0. 

EVENTS LOG

VIEW LOG

  

Overview of last 40 security events.

4

Summary of Contents for Home Prosafe Sc9100

















Reviews: