The security console
The security console
1. Display
2. Armed
- Indicator lights up when the alarm is
switched on.
3. Sirén
4. Battery
- Indicator lights up when the backup
batteries are empty or not installed.
5. Tamper contact
6. AC Adapter
connections.
7. Arm Home
button Alarm function for when you are at
home. All Door/Window Sensors are activated, but the
Motion Detectors remain unarmed.
8. Built-in Speaker.
9. Arm Away
button Full alarm. All sensors are
activated.
10. Built-in Microphone.
11. Wired inputs.
12. Telephone connection.
13. Emergency battery compartment. “Rechargeable
batteries only!”
.
14. Console Keypad Buttons.
Used for all number
entries.
15. Menu Start Up
- Used to initially enter the menu
and then to move up through the items.
16. Menu Start Down
- Used to initially enter the menu
and to move down through the items.
2
17. On
- Switch on a X10 Module.
18. Off
- Switch off a X10 Module.
19. OK
- Confirm setting.
20. Clear/Bypass
- Clear/bypass Used to clear
entries back up through the menu levels, and to
bypass problem Door/Window Sensors or Motion
Detectors.
LCD-Display
Zone numbers
- Every sensor represents a so-
called zone in the system. There are 30 zones for
wireless sensors (numbers 1-30 on the display) and
2 zones for wired sensors (numbers 31 and 32 on
the display).
Zone numbers on: Door or window is open
.
Zone number flashing slowly: There is a problem
with the sensor(page 9)
Zone number flashing quickly: The sensor has been
“overruled” with the Bypass Function (page 9)
Chime
- Chime is switched on when the system is
switched off. When this function is activated, you
hear a pleasant ding-dong when someone enters the
house (page 13).
