Electia Home Prosafe Sc9100 User Manual Download

Page: 3 / 16

Chose a good space for the console and make sure you have a wall socket (230V) and a telephone connection
close by. For optimal range it is best to mount the console central to the objects you wish to secure. This
ensures that the distance between the console and the sensors is as short as possible and the range will be
sufficient. Plan the location of the Door/Window Sensors and Motion Detectors so that the RF path which runs
in a straight line from sensor to Console is not obstucted by large metal objects such as a refrigerators or
freezers, and passes through as few walls as possible.

You can place the console on any flat surface or mount it onto the wall.

Connecting the AC adapter.

Connect the AC adapter to the corresponding connection(6). Plug the flying lead of

the adapter into a 230V/50Hz wall socket. You can fixate the wire by looping it behind the hooks on the back of the
console. When connecting the adapter and opening the top compartment of your console, you will see the word
TAMPER on the display. After closing the compartment, enter your PIN code(facyory settings 0000se page 12) to
remove the word TAMPER. The display now shows DISARMED and you will hear a double tone to confirm.
NOTE: Only use the Ps18 AC adapter included in the set..

Installing the emergency batteries

Just take off the discharge protection before installing the system(plastic flap with text “PULL”).Use always
rechargeable batteries.After inserting the batteries and closing the compartment,enter your pin code to remove the
word TAMPER. The display now shows DISARMED and you will hear a double tone to confirm.

Telephone connection

Open the top compartment on your console. Connect the telephone wire to the corresponding connection (12).
You can fixate the wire by looping it behind the hooks on the back of the console.Console can share line with a
standard phone but not a FAX. The console cannot be directly connected to an ISDN connection.Se page8

Installing

The contents of the Home Prosafe system.

After connecting the console, the display will read HOME CONTROL. The time will be displayed on the bottom line(for
setting the time, see page 8. If you do not see the words HOME CONTROL but TAMPER, you need to close the top
compartment on the console. After closing the compartment, enter your PIN code(factory settings 0000) to remove the
word TAMPER. The display now shows DISARMED and you will hear a double tone to confirm. Then the text HOME
CONTROL will be shown.

Choosing your language

All menu items are displayed in English for default. You can choose any of the other available languages as follows:
1.To access the menu press the

menu upp

menu down

button. The display now shows ENTER PIN.

2.Enter the 4-digit PIN code(factory setting 0000). The display is cleared and shows a * for each number entered. When
the PIN code has been entered correctly, the first menu item will show up on the display.
3.Use the menu buttons

upp/down

to go to menu item 7. OPTIONS. Press OK to select this menu item. You can also

go to this menu item directly by pressing a 7 on the keypad.
4.Use the menu buttons

upp/down

to go to submenu item LANGUAGES. Press OK to select this submenu item.

5.Use the menu buttons

upp/down

to select your language. Press OK to select and confirm.

7.Press Clear and afterwards 1(=Yes) to quit the menu.

The menus

Security base console SC28/SC9100

Motion detector MS18

Door/Window sensor DS18

Key chain remote KR18

Phoneplugs for Se and FI

Emergency, The built-in telephone dialler (Tone and Pulse) can dial up to six different telephone numbers..

Can register up to 16 wireless remote controls (KR18/KR21/SH600).

2 different alarm messages:custom recordable m fixed multi lingual emergency message.

Use the phone to listen to what is causing the alarm.

Silent alarm possible (no siren). Additional Ph7208 siren available..

2 inputs for wired sensors.

Intelligent sensor control: The console checks functions and battery status.

Trigged alarm (possible with lights are swiched O and OFF. Prevention with so called “LIVED IN LOOK”:
Your lights are switched ON and OFF in such a way that it appears as if you are home, in respond to the 7
days timer.

Can use up to 4 Thermostats Ts10. Temperature points to create e.g: Comfort, Economy and Frost level.

Important Properties and Features