CTC-1132 868AM 2007.07.18
38
<
<
N
N
O
O
T
T
E
E
>
>
)
A confirmation SMS message will read
on your mobile phone as:
“Confirmation, MICHAEL* 1234 11 00”
z
Send the SMS message to command
the Unit to enter Arm Mode without a
confirmation SMS back to your mobile
phone. The format is
M I C H A E L * 1 2 3 4 1 1
The
programmed
SMS keyword
User
PIN
Code
Remote
Control
Command
B. For 3-digit Remote Control Command
The 3-digit Remote Control Command is
used for turning off the Power switch.
z
Send the SMS message to command
the Unit to turn off the Power switch #
1, and send a confirmation SMS back
to your mobile phone. The format is:
J
O
E
1 2 3 4 5 1 0
0 0
The programmed
SMS keyword
User PIN
Code
Power
switch
Number
<
<
N
N
O
O
T
T
E
E
>
>
)
A confirmation SMS message will read
on your mobile phone as:
“Confirmation, Joy 1234 510 00”
z
Send the SMS message to command
the Unit to turn off the Power switch #
1 without a confirmation SMS back to
your mobile phone. The format is
J
O
E
1 2 3 4 5 1 0
The
programmed
SMS keyword
User PIN
Code
Power switch
Number
C. For 5-digit Remote Control Command
z
Send the SMS message to command
the Unit to turn on the Power switch #
1 for 1 Hour and than turn off, and
send a confirmation SMS back to your
mobile phone. The format is:
J O
E
1 2 3 4 5 1 1 0 1 0 0
The
programmed
SMS keyword
User
PIN
Code
Power
switch
Number
Time
<
<
N
N
O
O
T
T
E
E
>
>
)
A confirmation SMS message will read
on your mobile phone as:
“
Confirmed, Joy 1234 51101 00
”
z
Send the SMS message to command
the Unit to turn on the Power switch #
1 for 1 Hour and than turn off without a
confirmation SMS back to your mobile
phone. The format is:
J O E 1 2
3
4
5 1 1 0 1
The programmed
SMS keyword
User PIN
Code
Power
switch
Number
Time
XIII. Dialing & Call
Acknowledgment
1. Auto Dialing
z
If the system is in Arm mode, when an
alarm occurs, the Control Panel will
immediately dial the phone numbers you
preset and play the recorded messages.
z
If the system is in Home mode or
Disarmed mode, when an audible alarm is
initiated, the Control Panel will wait 15
seconds and then dial the phone numbers.
z
After dialing, the Control Panel will delay 5
seconds then starts to play the message.
It firstly played the general part of the
recorded message (address) then plays
the specific alarm message (Burglar, Fire,
Medical or Panic) depending on the nature
of the alarm.
z
To ensure the call is successfully received
by the recipient, the recipient should
acknowledge the message by pressing the
appropriate button on his telephone set.
z
The Control Panel, while playing the
message, will check if there is any
