33
1.5.3 - How to enter the programming menu
Do not carry or undertake programming operations or changing the parameters set in the MC2 module
of which you do not have knowledge, or have not received precise instructions and authorizations. All
operations must be performed by qualified personnel and in compliance with the safety standards.
The MC2 module must be in
MANUAL
mode before entering the programmation menue. Perform the following steps:
•
Press the “
Auto
” button to move between automatic and manual mode. Ensure that the green LED above the Auto button is off.
PRESS AND HOLD:
PRESS IN QUICK SEQUENCE:
+
+
•
You will get into the programming menu
•
To exit the programming menu press the “
4
” button
.
To move through the programming menu, use the “
2
”
and “
3
”
buttons. Press the “
6
” button
to confirtm or “
4
” button
to exit. To apply all the changes, go back to the main menu and restart the MC2 module by pressing the “
4
” button
.
User and Maintenance Manual
English
