31
en
MATL
ALU
Aluminium: 6350 m/s (0.2500 in/µs)
STL
Steel: 5918 m/s (0.2330 in/µs)
STST
Stainless Steel:
IRON
Iron:
CIRO
Cast Iron:
PVC
PVC:
PLST
Polystyrene:
PLUR
Polyurethane:
CUSTOM
Custom material. The common material types listed above each have
a standard factory-set sound-velocity. Materials of the same type, can
have varying grades and consistencies and as a result, the material
sound-velocity will also have slight variations.
CUSTOM
is included to
allow you to add your own sound-velocity, and can be programmed
via NDT Link PC software
UNITS
IN
Select for measurements in inches.
MM
Select for measurements in millimetres.
MODE
P-E
Select to measure non-coated material (bare metals).
PECT
Select to measure coated materials. Measures the thickness of both
the base material and coating.
E-E
Select to measure coated materials. Measures the base material only
without having to remove the coating.
E-E-E
Special multiple echo mode used only with Elcometer NDT single
element membrane transducers.
UG20DL LT ON
Select to switch on all the LEDs and display backlights.
LT OFF
Select to switch off all the LEDs and display backlights.
LT AUTO
Select to switch on all the LEDs and display backlights when the gauge
takes a measurement.
MEMOFF
Select to disable data logging. When selected, this submenu item
moves to the start of the top level menus.
Top Level
Menu Item
Submenu
Item
Description
