29
en
22 THE MENU COMMANDS
Note: The availability of these commands depends upon the transducer type and gauge settings.
Top Level
Menu Item
Submenu
Item
Description
STORE
A 1
Displays the current measurement reading storage location. This
location can refer to either a grid cell location (similar to a cell in a
spreadsheet), or a sequential format location, depending on which file
format was uploaded into the gauge.
Note: A grid file structure is loaded into the gauge prior to despatch
from the Elcometer NDT factory.
If
MEMOFF
is selected, the
STORE
top level menu item is replaced
by
MEMOFF
.
DIRECT NORTH
Part of the data logger. The submenu item selected specifies in which
direction to advance the cursor after a measurement is stored. If a two
dimensional grid format is being used, all direction options can be
used, however if a sequential file format is used, only
NORTH
and
SOUTH
are applicable.
If
MEMOFF
is selected,
DIRECT
is disabled and not displayed.
SOUTH
EAST
WEST
CLEAR
LOC
Part of the data logger. If a measurement is stored by mistake, or in the
wrong location, the measurement can be cleared from memory using
this option. Use
DIRECT
to advance to the location, then select
CLEAR
to erase the stored measurement.
If
MEMOFF
is selected,
CLEAR
is disabled and not displayed.
