Elcometer UG20DL, Operating Instructions Manual

Page: 9 / 32

8
en
5.1.1 Menu Structure - Dual Element Type Transducer
5.1.2 Menu Structure - Single Element Membrane Type Transducer
In order to simplify operation of the gauge, some of the menu items listed above will not be visible.
Visibility depends upon the gauge settings:
• If
MEMOFF
is selected (if you do not want to store measurements), the data logging section of
the gauge is disabled. As a result,
MEMOFF
moves to the first top level menu option (in place
of
STORE
) and
DIRECT
and
CLEAR
are disabled and not displayed.
• If a custom material type has not been uploaded into the gauge,
CUSTOM
is disabled and not
displayed in the
MATL
submenu.
The current settings of the gauge are displayed when it is switched on and then every 30 seconds.
This provides visual confirmation of the the settings at any time without having to scroll through the
menus to find the values of the settings. The gauge settings are displayed in the following order:
Gauge Model
UG20DL
Battery Status LO, MED, or HI
Transducer Type Identified 1/2 5, 1/2 3.5, 1/2 2 S or 1/2 5 S
Measurement Mode P-E, PECT, E-E or E-E-E
Current Gain Setting VLOW, LOW, MED, HIGH or VHIGH
Material Type ALU, STL, STST, IRON, CIRO, PVC, PLST, PLUR, or CUSTOM
STORE DIRECT CLEAR ZERO GAIN MATL UNITS MODE UG20DL
A 1 NORTH LOC AUTO VLOW ALU IN P-E LT ON
SOUTH MANUAL LOW STL MM PECT LT OFF
EAST COATIN MED STST E-E LT AUTO
WEST HIGH IRON MEMOFF
VHIGH CIRO
PVC
PLST
PLUR
CUSTOM
STORE DIRECT CLEAR MATL UNITS MODE UG20DL
A 1 NORTH LOC ALU IN E-E-E LT ON
SOUTH STL MM LT OFF
EAST STST LT AUTO
WEST IRON MEMOFF
CIRO
PVC
PLST
PLUR
CUSTOM