© Elcom s. r. o.
Service manual
Euro 2500
TX
69
To set the other tables, apply the above procedure accord-
ingly. Only select the desired table in step 1. Apply changes
to all relevant tables and only afterwards use the “Update all”
command (step 4). After the changes are done, the ECR ini-
tialises itself and requires a cashier login.
The ECR allows partitioning of the memory into tables shoWn
in the table on the facing page (default values in this table
are valid for the restaurant ECR mode).
Warning! All programmed data get erased after the “Update
all” command is issued! The ECR memory is filled with de-
fault demo data. It is recommended to back-up all the pro-
grammed data (PLU, DPT, cashiers…) into the PC. After the
memory ranges update, download the backed-up data back
into the ECR. The command is available after the monthly
report.
Note: In case the cash register’s application version is set to
cashier overlapping, all cashiers that are logged in the cash
register shall log out in order to make any changes to mem-
ory partitioning.
Note: Available memory size is displayed in the memory
ranges or service mode printout.
5.8 IN-LINE
Tab. 5.23: Memory partitioning defaults.
Display
Default
Description
Available values
1.PLU table
1,000
maximum number of programmed PLUs
Maximum value that
can be set is deter-
mined by the ECR
memory and other
tables’ parameters.
Minimal value is 1.
2.Departments
16
maximum number of programmed departments
3.Surch/Disc
7
maximum number of programmed surcharges/discounts
4.Payments
12
maximum number of programmed payments
5.Cashiers
12
maximum number of programmed cashiers
6.Tables
99
maximum number of programmed desks
7.Customers
20
maximum number of programmed customers
8.Bill items
500
maximum number of opened bill items
9.Bills
100
maximum number of bills
10.DPT groups
8
maximum number of programmed department groups
11.PLU links
50
maximum number of programmed PLU lnks
12.Promotions
5
maximum number of programmed promotions
13.Units
8
maximum number of programmed units
14.Descr.texts
20
maximum number of programmed descriptive texts
15.Text links
50
maximum number of programmed text links
16.Direct keys
160
maximum number of programmed direct keys
17.Aditive text
10
maximum number of programmed additional texts
18.Cust.text
10
maximum number of programmed customer texts
19.Actual promo.
100
maximum total number of promotions on all opened bills
20.Cashier*Paym
144
maximum number of programmed cashier authorisations for payments
500.Update all
–
command to update the values
–
The ECR is capable to communicate with PC as the master
device and ECR as slave device. Communication via RS-232
allows connection of one ECR to a PC and communication
via RS-422 allows connection of maximum 32 ECRs to a PC.
1. Look up “IN-LINE” in the service mode menu or enter the
code 950 and press
O
K
E
NTER
(
N
UM
E
NTER
).
2. Press
O
K
E
NTER
(
N
UM
E
NTER
). Single submenu is available.
3. Look up “Device name” or enter code 1 and press
O
K
E
NTER
(
N
UM
E
NTER
).
4. Enter the new device name and press
O
K
E
NTER
(
N
UM
E
NT
-
ER
). It mustn’t be an empty string.
900.Service mode
|
950.IN-LINE
950.IN-LINE
1.ECR0 2
1.ECR0 2
>
1.Device name
ECR0
ECR1
