ELCOM Euro-1000T, User Manual

Page: 67 / 88

67
© Elcom Ltd. Euro-1000T Reports
5 REPORTS
5.3 The report contents
5.3.1 Reports of departments
When printing a full department report, only non-zero value departments are printed.
Report contains:
1. Name of the department
2. Number of items sold in the department
3. Total value of the items sold in departments
4. Total value of sale including all departments
Report ,,
X
” mode ,,
Z
” mode
Departments
•
PLU
• •
Cashier
•
Financial
•
Daily (Total)
• •
Periodical
• •
5.1 How to print out reports
Two modes for printing reports are: “ X “ mode and “ Z “ mode.
Use the reading mode “X“ when it is necessary to obtain sales information since the last resetting.
It is used to generate reports during the day, between two shifts, etc. The reading may be made any
number of times. It does not affect the register memory. Also you can turn off time printing on the
receipt pressing 803 Q
in the “X“ mode. You can turn the time printing on by the same process as
used for turning off.
Use the resetting function of the “Z“ mode when you need to print reports and to clear the register’s
memory. Resetting prints all sales information and clears the entire memory except for the GT1
through GT3, reset count and consecutive number. Z report is usually carried out once a day after
finalizing the daily report.
Note: In the “Z” mode the department report, the cashier’s report and the financial report are carried out
by means of the total “Z“ report.
Note: In the “Z“ mode it is possible to print the department report only by means of the total „Z“ report.
See chapter The total „Z“ report.
5.2 The generated reports