19
Installation
Flue gas connection ø 125/80 PPS
Combustion air issued to the environment
B33
-
Flue gas routing via roof
Basic kit
POS
Description
1a
Flue gas connection for B23
1b
T-connection with 87,5°,
with covering
2
Hose with sleeve
Assembly instructions
3
4
5
6
7 m vertical hose kit
consisting of:
-Connection base
-Connecting elbow with 87,5°
-3 hoses with sleeves 1,95 m
-1 hose with sleeve 1 m
-3 spacers
-Cowl
Hose with sleeve 1 m
Hose with sleeve 1,95 m
10
Connection piece with
inspection opening, covering
attached by screws
11
Elbow 30°
Elbow 45°
Elbow 87,5°
5
Spacer (all must be 2 m)
When connecting heating appliance
and flue, condensate-resistant
products must be used. For lengths
and realignment of the circuit points
the table on page 16, conducting
variants, applies.
The flue must correspond to the
instructions of the DIBT and be
licensed for the flue gas connection of
burner appliance.
The air intake opening for ventilation
of the room from outside must have
a size corresponding to one of the
guidelines in force.
