35
Installing the mounting rack
Tile roof, type A:
Sloped roof assembly, vertical
Install fasteners
•
Insert a fastener for the manifold into
the mounting rail and position it so
that it is flush with the upper edge of
the mounting rail. Press on the bolt to
snap the fastener into place.
•
Insert the fastener for the bottom rail
flush with the lower end of the mount-
ing bracket and line it up. Press on
the bolt to snap the fastener into
place. To keep the fastener in place,
hand tighten the nut by two or three
turns; do not tighten permanently yet.
Inspection
After installing the fasteners, double
check their height and position. All fas-
teners shall be lined up at the same
level. Fasteners and mounting rails
shall always be parallel and perpendic-
ular to the roof covering. Reposition the
Z-brackets to make any necessary ad-
justments. Loosen the Z-bracket bolts
and mounting bracket and adjust the
mounting rack. Retighten the bolts.
