REBLE610 Fully indoor Microwave Link
Page 24 of 52
Version 1.4
7.5
Menu I/O (IO).
The I/O menu let the user check the equipment baseband inputs and outputs status. Directional arrows
allow the browsing in the menu.
7.5.1
I/O submenu.
The submenu let a fast access to the three types of input/output signals available, that is Ethernet, ASI/BTS
and loop management; icons meaning, concerning different sections, is intuitive.
Figure 37: I/O Sub-menu.
Active areas:
Directional arrow “UP”
to go back to main menu.
Icons
.
7.5.2
Ethernet menu.
Ethernet menu let the user check the status of Gigabit Ethernet port.
Figure 38: Menu Ethernet.
Active areas:
Directional arrow “UP”
to go back to main menu.
Display shows following indications and measurements:
Tag
Type
Description
Link Status
Led
Link active status indication (the port is functioning and it’s connected to another
functioning port).
Speed
Casella
Connection speed (10/100/1000).
Duplex
Casella
Half-duplex or full-duplex connection indication.
Rate out
Casella
Output data speed.
Rate in
Casella
Input data speed.
Dem Data
Led
Indication of data received from demodulator.
OVF
Led
Overflow signaling.
Pause Recvd
Led
Pause frames received from an another device (output data bit rate is higher than
