background image

10

USE OF THE GAS OVEN

4

The glass on the oven door reaches 

high temperatures during operation.

Keep children away.
The cooker lid must be kept open when 

the gas oven is in use.
WARNING:

The door is hot, use the handle.

GENERAL FEATURES

The oven is furnished completely clean; it 

is advisable however, upon first use, to turn 

the oven on to the maximum temperature 
(position 

10

) to eliminate possible traces of 

grease from the oven burner.

The gas oven is provided with:

• 

One gas burner (wattage: 3,20 kW), 
located at the bottom, providing safety 
valve device.

THERMOSTAT

The numbers 

1

 to 

10

 printed on the knob  

(fig. 4.1) indicate the increasing oven tem-

perature value (see table 4.2). 
To regulate the temperature, make the 

chosen number of the knob (fig. 4.1) match 

with the indicator on the control panel.
The temperature is kept constant on the 
regulated value.

The thermostat which regulates the flow of 

gas to the oven burner has a safety valve 
which automatically shuts off the gas sup

-

ply when the flame goes out.

Fig. 4.1

9

1

0

6

7

8

3

4

5

1

2

OVEN BURNER

It carries out normal “oven cooking”.

The gas flow to the burner is regulated by 

a thermostat which allow to maintain the 
oven temperature constant.
The control of the temperature is assured 
by a thermostatic probe positioned inside 
the oven.
The probe must be always kept in its hou

-

sing, in a clean condition, as an incorrect 
position or encrustment may cause an al

-

teration in the control of the temperature.

OVEN DOOR GUARD

The glass on the oven door reaches high 

temperatures during operation.

For child safety, a door guard can be fitted 

to prevent contact with the hot glass.

The  door  guard  (thermoreflective  door  in

-

ner glass) is supplied as an accessory at 

extra cost, if required.

Contact the After-Sales Service and indi-

cate the model name of your product (see 

product data plate).

Table. 4.2

Summary of Contents for EGC 533 CM





























Reviews: