24
OPERATIONS TO BE EXECUTED
FOR THE REPLACEMENT OF THE
INJECTOR OF THE OVEN BURNER
•
Lift and remove the lower panel inside
the oven.
•
Remove the burner securing screw
(fig. 7.6).
•
Withdraw the burner as shown in figu-
re 7.7 and rest it inside the oven.
Take care not to damage the wire to
the safety valve probe.
•
Using a 7 mm box spanner, unscrew
the injector (indicated by the arrow in
fig. 7.7) and replace it by the proper
one according to the kind of gas.
•
Then replace the burner repeating the
above steps in reverse order.
Fig. 7.7
Fig. 7.6
Ring opening
PRIMARY AIR OF THE OVEN BUR-
NER
With a screwdriver untighten the two screws
(fig. 7.8) and move forward or backward
the air ring to close or open the air flow,
according to the “Table for the choice of the
injectors”.
Light the burner and check the flames.
Fig. 7.8
Summary of Contents for EGC 533 CM
Page 27: ...27...
