35
GAS INSTALLATION REQUIREMENTS
Important !
•
The walls adjacent to the cooker must be of heat-resistant material.
•
Before installation, make sure that the local distribution conditions (gas type and
pressure) and the adjustment of this appliance are compatible. The appliance
adjustment conditions are given on the plate or the label.
•
This appliance must be installed and serviced only by a suitably qualified,
registered installer. The installer shall refer to the local standards in force.
•
Failure to install the appliance correctly could invalidate any manufacturer’s
warranty.
This appliance is supplied for use on LPG (Cat.
I
3+, G30/G31, 28-30/37 mbar; check
the gas regulation label attached on the appliance).
INSTALLATION & SERVICE REGULATIONS (UNITED KINGDOM)
It is a legal requirement that all gas appliances are Installed & Serviced by a competent
person in accordance with the current editions of the following Standards & Regulations or
those regulations appropriate to the geographical region in which they are to be installed:
•
Gas Safety (Installation & Use) Regulations
•
Building Regulations
•
British Standards
•
Regulations for Electrical Installation
Installation and service of any gas product must be made by a suitably qualified and regi-
stered person competent on the type of product being installed or serviced and holding a
valid certificate of competence for the work being carried out. Currently the proof of com-
petence is the Accredited Certification Scheme (ACS) or S/NVQ that has been aligned to
the ACS.
It is also a requirement that all businesses or self employed installers are members of a
class of person approved by the Health and Safety Executive.
Failure to install the appliance correctly could invalidate any manufacturers warranty and
lead to prosecution under the above quoted regulation.
- UNITED KINGDOM -
THE FOLLOWING INFORMATION ARE FOR THE UNITED KINGDOM ONLY
GAS SECTION
8