70
IMPORTANT: The cooker must be in-
stalled in accordance with the manu-
facturer’s instructions.
Incorrect installation, for which the
manufacturer accepts no responsi-
bility, may cause damage to persons,
animals and things.
N.B. For connection to the mains, do
not use adapters, reducers or branch-
ing devices as they can cause over-
heating and burning.
If the installation requires alterations to
the domestic electrical system or if the
socket and appliance plug are incompat-
ible, call an expert.
He should also check that the socket ca-
ble section is suitable for the power ab-
sorbed by the appliance.
GENERAL
•
Connection to the mains must be
carried out by qualified personnel in
accordance with current regulations.
•
The appliance must be connected to
the mains checking that the voltage
corresponds to the value given in
the rating plate and that the electri-
cal cable sections can withstand the
load specified on the plate.
•
The appliance is supplied without a
power supply plug and therefore if
you are not connecting directly to
the mains, a standardized plug suit-
able for the load must be fitted.
•
The plug must be connected to an
earthed socket in compliance with
safety standards.
•
The appliance can be connected di-
rectly to the mains placing an omnip-
olar switch with minimum opening
between the contacts of 3 mm be-
tween the appliance and the mains.
•
The power supply cable must not
touch the hot parts and must be po-
sitioned so that it does not exceed
75°C at any point.
•
Once the appliance has been in-
stalled, the switch or socket must
always be accessible.
•
If the power supply cable is dam-
aged it must be substituted by a
suitable cable available in the after
sales service.
The connection of the appliance to
earth is mandatory.
The manufacturer declines all re-
sponsability for any inconvenience
resulting from the inobservance of
this condition.
Before effecting any intervention on
the electrical parts of the appliance,
the connection to the network must
be interrupted.
11 ELECTRICAL SECTION
