background image

 

11 

 

Money settings* 

To adjust the value for each channel 

coin 1 

– 6*:

 To adjust the value of a coin for each channel. 

Coin 1 is equal to the first channel of the coin acceptor. 

b3 

– b2 – bill 1*:

 to adjust the value of the bill acceptor. 

coin 5 (b3) and card 6 (b2) can 
 be used either as coin or bill channel. 

last coin ch*: 

this number determines up to which channel the 

money is counted as coins. The following channels will be 
counted as bills. E.g. when this figure is 4, the first 4 channels 
will be counted as coins. Everything from the 5

th

 channel will 

be counted as bills in the menu 

accounts/cashbox

money value*:

 the basic value of coin and bills.  

decimals*:

 the visual numbers after the comma. If there is 

indicated 1 than the money values will be displayed up to 1 number after the comma ex. 20,5. 

meter divider*:

 

the value of a pulse to the mechanical counters. e.g. if  ‘1’ is marked, then 1 pulse 

will be given to the counters by each Euro. A 2 Euro coin will count 2 units on the counter. The 
amount you see will be the amount in Euros.. 
 

System settings 

link address (link):

 every playfield in an Intelli network has a 

unique number that can be set in this menu. 1 is the standard 
number and if this is 0 than it will not be recognized as present 
in the link. 

inactive alarm*:

 an alarm will appear on the Intelli link when not 

played during this time. 

S delete picture*: 

 press S to delete a picture showed on the 

screen at that moment. Only possible if this option is installed. 

S set video mode*: 

 this function shows  a live camera image in 

the screen. This way you can adjust the camera. This function will be disabled with a new action. 

S load defaults xxx*:

 to load the default settings, specific for your country or continent and 

depending on your local legislation. 
 

Playfield 

S set for ‘600mm:

 to set the playfield size to a width of 600mm. 

S set for ‘900mm:

 to set the playfield size to a width of 900mm 

S set for cosmic: 

 to set the playfield size to a width of 

1200mm = Cosmic. 
After loading the default settings some parameters can be 
adjusted as desired. 

‘780’ – ‘1100’ – ‘1460’ = Creative Line !

 

 

game pos F-B*:

 the depth of the start position 

game pos L-R*:

 the width of the start position 

back margin*:

 the margin where the gantry stops in the back. 

size F-B*:

 depth of the playfield. 

size L-R*:

 width of the playfield. 

drop corner F-B*:

 to set the depth of the prize chute. The width 

will be programmed automatically by S 600, 900 or 1200 function. 
 
 
 
 
 
 
 

MONEY SETTINGS 
coin 1            0.2 

coin 2            0.5 
coin 3            1.0 
coin 4            2.0 

coin 5 (b3)       0.1 
card 6 (b2)      10.0 
bill 1            5.0 

last coin ch        5 
money value       0.1 
decimals            1 

meter divider     1.0   

SYSTEM SETTINGS    
link address        1 
inactive alarm     5h 

S delete picture  
S set video mode 
S load defaults   EUR 

S load defaults   USA 

S load defaults    UK   

PLAYFIELD    
S set for     '600mm' 
S set for     '900mm' 

S set for     Cosmic 
S set      '780'/ 31i 
S set      '1100'/43i 

S set      '1460'/57i 
game pos F-B       26 
game pos L-R       30 
back margin         5 

size F-B           52 
size L-R           53 
drop corner F-B    22

 

Summary of Contents for E-Claw 600 1 sp


























Reviews: