11
L A M P I N S T A L L A T I O N
L A M P R E P L A C E M E N T
Please note that due to the nature of the Philips™ Platinum
21R Lamp and the optical path of the fixture, the lamp MUST
BE replaced at 1,500 hours.
Use only Genuine Original Philips™ Platinum 21R Lamps.
Other brand lamps may cause damage and void warranty!
INSTALLING OR REPLACING THE LAMP
To ensure a proper/safe lamp change, carefully read all the following instructions.
LAMP PROTECTION CIRCUITRY
Because of the nature of the extreme heat associated with the
Philips™
Platinum 21 R
lamp
and the unique IP65 rated sealed optical system, it is
IMPERATIVE
that the lamp be
replaced at
1,500 Hours
or sooner. This is done to protect the internal sealed optical system
as well as prevent accidental lamp explosion, which could lead to hot glass particles falling
from the fixture.
FAILURE TO CHANGE THE LAMP WITHIN 300 HOUR of the 1,500 HOUR RATED LIFE,
WILL CAUSE THE FIXTURE TO AUTOMATICALLY SHUT DOWN!
At
1,500 Hours
the LCD control display will begin to flash,
“Replace The Lamp”
and the
lamp will flicker for the first five minutes of operation. At this point the lamp has reached the
maximum rated life and should be replaced immediately. After the lamp has flickered for
about five minutes it should strike normally allowing the fixture to be used temporarily until
a replacement lamp can be installed. The fixture will continue to operate for an additional
300 hours, however the
“Replace the Lamp”
warning will continue to flash in the display.
Keep in mind that the flicker protection circuitry will only work for about 300 Hours (lamp
clock life of 1,500-1,800 Hours).
After 1,800 Hours
the fixture will no longer respond to DMX commands and immediately
enter a hibernation mode that will electronically discontinue all fixture functionality with the
exception of a few menu commands. The fixture will continue to enter hibernation mode
until the lamp is replaced and the lamp clock has been reset. To replace the lamp follow the
safety guidelines and procedures listed on the next page.
Summary of Contents for PROTHEUS HYBRID
