Power Spot 575™
©Elation Professionals® Los Angeles, Ca. - wwww.ElationLighting.com - Page
15
2.8 5-Pin XLR DMX Connectors.
Some manufactures use 5-pin XLR connectors
for DATA transmission in place of 3-pin. 5-pin XLR fixtures may be implemented in a
3-pin XLR DMX line. When inserting standard 5-pin XLR connectors in to a 3-pin
line a cable adaptor must be used, these adaptors are readily available at most
electric stores. The chart below details a proper cable conversion.
2.9
Fuse Requirements
The
POWER SPOT 575
electronic system is protected by a 5x20 mm external fuse:
250v / 10A (US model) or 230V / T 5 A (EU model).
The fuse requirements are clearly printed on the side of the fixture.
WARNING:
•
Always disconnect main power before changing the fuse!
•
Always replace with the exact same type fuse unless otherwise specified
by an authorized Elation
®
service technician. Replacing with anything
other than the specified part can severely damage your fixture and will
void your manufactures warranty.
2.10
Transportation and Handling
The
POWER SPOT 575
™
comes with two carrying handles built into the base.
Always transport the fixture by these handles. Never lift or carry the
POWER SPOT
575™
by the yoke (head assembly) this can seriously damage the unit.
