Power Spot 575™
©Elation Professionals® Los Angeles, Ca. - wwww.ElationLighting.com - Page
24
wheels and other motors. This feature is reserved for a service technician and
is sometimes required after a service or repair work.
This function requires a service code only available to authorized service
technicians.
Use the
Up
and
Down
buttons to select the function that requires calibration
and press the
Enter
button to confirm the adjustment or the
Mode
button
to
cancel and return to the menu. Use the
Up
and
Down
buttons to set the
adjustment values and confirm once more with the
Enter
button or use the
Mode button to cancel the operation.
Function
Value
Remark
ADJU
CODE xxxx
Adjustments in the internal setup are code
protected (for authorized persons only).
COLO
- 99 - + 9 9
Adjustment of the Color wheel
GOB1
- 99 - + 9 9
Adjustment of the Gobo wheel 1
GOB2
- 99 - + 9 9
Adjustment of the Gobo wheel 2
PRIS
- 99 - + 9 9
Adjustment of the Prism wheel
SHTR
- 99 - + 9 9
Adjustment of the Shutter
POFS
- 99 - + 9 9
Adjustment of the Pan-Offsets
TOFS
- 99 - + 9 9
Adjustment of the Tilt-Offsets
ARES
- 99 - + 9 9
Adjust Reset (wheels stand still after the reset)
CLRE
Adjustments in the internal circuit.
FACC
- 99 - + 9 9
Must switched to
ON
(code protected)
VTIL
- 99 - + 9 9
Software version of Tilt-board
VTOP
- 99 - + 9 9
Software version of Head- board
VBOT
- 99 - + 9 9
Software version of Base- board
FASP
- 99 - + 9 9
Indication of the Fan-Speed
3.9.9 Default Settings
DFSE
This function is used to restore all the factory default settings and presets.
Press the
Enter
button to confirm this operation or the
Mode
button to cancel
and return to the menu. When this operation is selected the LED will briefly
readout
ok
, then return to the previous function. The chart below details the
factory defaults.
Function
Display
Default Settings
