E L A N H O M E S Y S T E M S
Page 68 © ELAN Home Systems 2009 • All rights reserved.
DT22-240
INSTALLATION MANUAL
Function:
Switch to FM band on desired tuner.
This will also switch to the last FM station played on this tuner.
Query:
&DT,
dd
,BAND,?<cr>
dd
= ST, R1, R2
Function:
Query the currently selected band of the desired tuner.
This response will also be sent as unsolicited feedback.
Response:
*DT,R1,BAND,AM<cr>
or
*DT,R1,BAND,FM<cr>
Tune
Command:
&DT,
dd
,TUNE,fffff<cr>
dd
= ST, R1, R2
Function:
Tune to the given frequency.
FM: desired frequency divided by 10 kHz.
EXAMPLE: &DT,R1,TUNE,9810 (Tunes to 98.1 MHz)
AM: desired frequency divided by 1 kHz.
EXAMPLE: &DT,R1,TUNE,630 (Tunes to 630 kHz)
Not all values are valid. Valid values depend on band and region.
Command:
&DT,
dd
,TUNE,UP<cr>
dd
= ST, R1, R2
Function:
Step up one frequency step.
Actual step size depends on band and region.
Command:
&DT,
dd
,TUNE,DOWN<cr>
dd
= ST, R1, R2
Function:
Step down one frequency step.
Actual step size depends on band and region.
Query:
Summary of Contents for DT22-240
Page 1: ......
