E L A N H O M E S Y S T E M S
© ELAN Home Systems 2009 • All rights reserved. Page 55
DT22-240
INSTALLATION MANUAL
Dump Command Structure
Dump command structure is a query but does not follow the same response pattern as the
Query command structure. The Query command structure Response started with a * (asterisk).
Dump outputs information in XML.
Status Command Structure
Status command structure is a query but does not follow the same response pattern as the
Query command structure. The Query command structure Response started with a * (asterisk).
Status outputs information in formatted sentences.
Command Structure
Each main body of the command structure is separated by a comma (44 in decimal or 0x2C in
hex.)
&DT,<dd>,<COMMAND>,<SUBCOMMAND><cr>
dd is the address of the command.
Valid addresses are:
•
CH
: DT22 chassis
•
ST
: Selected Tuner
•
R1
: First AM/FM radio
•
R2
: Second AM/FM radio
&DT will always preceed the Command:.
<SUBCommand> may or may not be used.
<cr> carriage return will always follow the command.
<COMMAND>
All commands will be acknowledged if they are successfully decoded.
Commands which are not understood will be ignored, and no response will be generated.
The
ACK
response will look like this:
*DT,dd,ACK<cr>
Power On/Off/Toggle
Comand:
&DT,CH,POWER,ON<cr>
Function:
Turns DT22 on.
Command:
&DT,CH,POWER,OFF<cr>
Summary of Contents for DT22-240
Page 1: ......
