E L A N H O M E S Y S T E M S
© ELAN Home Systems 2009 • All rights reserved. Page 67
DT22-240
INSTALLATION MANUAL
Signal
Query:
&DT,
dd
,SIGNAL,?<cr>
dd
= ST, R1, R2
Function:
Query the current signal level.
Signal level from 0 to 100 percent.
This response will also be sent as unsolicited feedback.
Response:
*DT,R1,SIGNAL,100<cr>
Scan
Command:
&DT,
dd
,SCAN,UP<cr>
dd
= ST, R1, R2
Function:
Begin scanning up through all presets in the current group.
Each preset is played for 10 seconds.
Send any other command to stop scanning.
Command:
&DT,
dd
,SCAN,DOWN<cr>
dd
= ST, R1, R2
Function:
Begin scanning down through all presets in the current group.
Each preset is played for 10 seconds.
Send any other command to stop scanning.
AM/FM Band
Command:
&DT,
dd
,BAND,AM<cr>
dd
= ST, R1, R2
Function:
Switch to AM band on desired tuner.
This will also switch to the last AM station played on this tuner.
Command:
&DT,
dd
,BAND,FM<cr>
dd
= ST, R1, R2
Summary of Contents for DT22-240
Page 1: ......
