EL elmeta mds 50, Operating Instructions Manual

Page: 16 / 22

16/22 BEA--250127-EN-09
ELMETA
®
MDS 50
15
output 2 adjust
(chapter 7.4)
16 normal - invers 1 0 1 R/W Output 2
0 = 24 V ON at signal
1 = 24 V OFF at signal
17 distance
out 1, out 2
0 0 1999 R/W Distance between metal detector and lift-off point in cm
Only in connection with a pulse transmitter,
Parameter 11 > 0
18 distance out 2 on 0 0 199 R/W Distance for how long output 2 is set, in cm
Only in connection with a pulse transmitter,
Parameter 11 > 0
19 diagnostics
20 running time meter 0 0 65535 R Running time in h
21 detected parts 0 0 32000 R Number of detected metal particles
22 system error 0 0 499 R Aktual system errorr
(will be displayed only as long as the error is actually
there. It will then be written into an error memory.
parameter 23 to 25)
Error code
..0 = no error
..1 = operational voltage too low
..2 = operational voltage too high
..3 = operational voltage/emitter voltage too low
..4 = temperature too high > 85°
..5 = sensor system defect
..6 = system compensation oscillates
..7 = system compensation too little
..8 = system compensation too big
23 history number 0 0 50 R/W Number of system error in error memory
0 = most recent system error
50 = oldest system error
24 history error xx 0 499 R Error code at parameter 23
25 history time xx 0.0 65535 R Working hour at parameter 23
26 supply voltage xx 0 100 R Operational voltage in V
27 temperature xx 0 100 R Temperatur im Verstärker in °C
28 AC signal xx 0 255 R Signal phase relation
29 DC signal xx 0 255 R Signal amplitude
30 webspeed xx R Web speed
Only in connection with a pulse transmitter,
Parameter 11> 0
31 autocal by ready xx 0 32000 R Auto - compensation during operation
32 testmode Parameter for testing and service purposes,
o be modified only after consultation with E+L
33 testmode on-off 0 0 1 R/W Test mode ON-OFF
0 = OFF
1 = ON
Parameter 34 - 43 can only be modified if test mode is
ON
34 amplification real xx 1 100 R/W Amplification in %
35 integration time xx 1 100 R/W Phase error integration time in %