LUPUS2K - VOLANS2K
- TECHNICAL MANUAL -
090001113
[email protected]
elmospa.com
6
5. HOUSING OPENING AND CLOSING
Perform the following basic operations in order to open and close the transmitter housing.
Opening.
Closing.
6. FIRST POWER-ON OR BATTERY REPLACEMENT
Particular care is required during first powering. The operations to be performed are listed in the next steps:
1. Insert the 3.6 V battery (supplied as standard equipment) checking the correct polarity.
2. Press and release the Tamper button 3-4 times.
3. Reset any memory of low battery on the control unit or on the compatible receiving device.
WARNING: in case you use a new battery or a battery that has not been used for a long time, a wrong indication of
low battery may occur at first activations. Such issue is related to the chemical features of Lithium Thionyl Chloride
batteries and it can be solved implementing the above operations.
In case of usage in low temperature locations, we suggest that you keep the battery at room temperature before
insertion.
LEAN THE COVER HERE
IN ORDER TO ACCURATELY HOOK
THE TWO CLIPS CLOSE TO THE BATTERY
UNDERLYING SURFACE FOR THE PIEZO SENSOR
ACCURATELY
HOOK THE
FRONT CLIP
MAKE SURE THE TAMPER SPRING
PROPERLY FITS IN THE BLOCKING
POSITION ON THE COVER
MAKE SURE THE LED PROPERLY
FITS IN THE HOLE ON THE COVER
