- 18 -
METHOD 2
STEP 1
Prepare your suitably-sized PC chassis for the installation of the radiator
unit. The position of the unit in the chassis depends on its size, fan
mounting holes, and hardware that is installed. You must make sure the
unit fits into the case. Usually, cases already have standard pre-drilled fan-
mounting holes, and you should look for those with a spacing of 105mm
(for standard 120mm computer cooling fans).
STEP 1
STEP 2
Align the holes of the radiator and fans with the ones in the PC chassis.
Take four (4) UNC 6-32 x 30mm screws for each fan and guide
them through the holes of the chassis and fans, then screw
them into the threaded holes of the radiator. Tighten them in a
clockwise direction using the enclosed Allen key.
STEP 2
UNC 6-32 X 30mm Screws