- 14 -
STEP 3
Loosely install all four standoffs and plastic washers before
proceeding to tighten them completely. It is mandatory to install
plastic washers as they prevent damage to the motherboard PCB.
Using pliers or similar tools is not recommended.
STANDOFF
PA WASHER
STEP 3
STEP 4
Wipe the IHS clean using a non-abrasive cloth or Q-tip, as shown in
the image. Once it’s clean, apply a line of Thermal Compound to one
edge of the IHS and use a plastic card or something similar to spread
it evenly. The layer of Thermal Compound must be thin and even in
thickness over the entire surface of the IHS. The excessive or uneven
application will lead to poor performance!
Non-abrasive
cloth
IHS
STEP 4
