- 41 -
STEP 2
Try to visualize the tube route and then measure its distance by
trying to fit it into the chassis. Mark the required length with a
felt-tip pen.
Before you make the first cut, keep in mind that it’s best to
have 2–3cm in tube length to spare. You can always shorten
the tube afterward.
For the coolant to flow without restriction, make sure the
tube is not bent or twisted.
STEP 2
STEP 3
If you assembled the components according to this installation
manual, all the compression fittings should have already been
installed.
To fit the tubing onto the compression fittings, you will have
to remove fitting rings by rotating them in a counter-clockwise
direction.
STEP 3
