- 38 -
STEP 2
Once cut to size, thermal pads should be placed on the backplate,
as shown on the diagram.
STEP 2
Thermal Pad F 1.5mm
Thermal Pad
F 2.0 mm
ATTACHING THE BACKPLATE
Place the backplate on the PCB and make sure all holes are aligned.
Position an M2.5X8 AX1 screw in each of the six (6) mounting holes
(as shown in the image) and tighten them evenly with a Phillips
head screwdriver.
Do not use excessive force!
For this Step, you will need:
M2.5 x 8 AX1
Screw (6 pcs)
M2.5 x 8 AX1
Phillips Head
Screwdriver
8 mm
