/ 20 /
STEP 3
Align the holes on the radiator with the ones on the PC chassis.
Take the four UNC 6-32x5mm screws for each fan and guide them
through the holes on the chassis to screw them into the threaded
holes on the radiator. Tighten them in the clockwise direction using
the Allen key.
STEP 4
Install the compression fittings on both G1/4 extender openings on
the radiator. Tighten the fittings barb in the clockwise direction until
the gasket underneath is compressed.
The installation of the radiator and radiator cooling fans is now complete.
OPTION #2:
INSTALLING THE RADIATOR AND FANS IN
ONE GO
STEP 1
Prepare your suitably-sized PC chassis for installation of the radiator
unit. The position of the unit in the chassis depends on the size, fan
mounting holes, and the hardware you have installed. You must
make sure that the unit fits into the chassis. Usually, the chassis have
standard fan mounting holes pre-drilled so you should look for holes
with the spacing of 105mm (a standard computer cooling 120mm
fan) or 125mm (for 140mm cooling fan).
Fitting Barb
Fitting Ring
PC Chassis
Radiator/Fan unit
UNC 6-32 x 5 Screw
STEP 1
STEP 4
STEP 3
