/ 34 /
MAINTENANCE
STEP 2
Measure the length of the tube that is needed to connect the CPU to
the GPU water block and the GPU water block to the pump-reservoir
unit. You can use a pair of scissors or a knife to cut the tube.
You may need an additional tubing to connect the water
block.
Attach the tube onto the both fitting barbs until it sits firmly. Secure the
fitting compression ring to make the assembly complete. Check again
that all of the tubing is secured by compression fittings as intended.
If it is not, please repeat STEP 1 to STEP 5 of chapter CONNECTING
THE TUBING.
Fill the system by following the steps in the chapter FILLING
THE SYSTEM FOR THE FIRST TIME.
In order to obtain the best performance
throughout the whole lifespan of the product,
it is crucial to follow these maintenance tips:
TIP 1: DUST REMOVAL
It is mandatory to remove the dust every
2-3 months
. EK
recommends using a vacuum cleaner or compressed air to blow
the dust away. The dustiest is usually the radiator so pay special
attention to that. Do not forget to turn off the computer and unplug
the power supply. It is recommended to remove the dust outside.
TIP 2: CHECKING ELECTRICAL COMPONENTS
Once a year
you should check the pump and the fans, if they are
running as they should. The pump and fans must run silently without
any rattling noises and must react to PWM duty cycle changes. All
imperfections may lead to overheating and breakdown.
TIP 3: CLEANING THE UNIT (RELATED TO CHAPTER
TROUBLESHOOTING)
Every year
the unit should be thoroughly cleaned. You must let
all the coolant out (Page 29). The radiator must be flushed and
the pump checked and cleaned. It is recommended to change the
tubing.
TIP 4: USE EK DESIGNED AND MANUFACTURED PARTS
ONLY
It is recommended to use only genuine EK Water Blocks liquid cooling
gear, parts and add-ons to prevent any performance, compatibility or
warranty issues.
STEP 2
